SAFETY INSTRUCTIONS FOR THE DISK SANDER

1. The resting table should be no more than 1/16 of an inch from sanding disk..

2. Goggles must always be worn.

3. Sand only on the down stroke side of the disk.

4. Do not sand small pieces with this tool , sand them by hand.

5. Turn off power and stop the sander with the cleaning eraser or a board.

6. Stop sander to make adjustments.

7. Never touch a moving sander.

8. Do not use sander if paper is loose.

9. Move your work about (back & forth) to prevent heating and burning a section of the sanding disk.